Yamaha RX-V1500 Mode D'emploi page 34

BASIC SETUP
7
Press n to select SPEAKERS, then press
l / h to select the number of speakers
connected to the unit.
The choices vary as follows depending on the
PRESENCE setting:
PRESENCE setting
Choices
YES
2
—
3
—
Presence L/R,
L L R
4
Front L/R
Presence L/R,
L L C R
5
Front L/R,
Center
Presence L/R,
L L R
Front L/R,
6
SL SR
Surround L/R
Presence L/R,
L L C R
Front L/R,
SL SR
7
Center,
Surround L/R
Presence L/R,
L L C R
Front L/R,
SL SB SR
8
Center,
Surround L/R,
Surround back
Presence L/R,
L L C R
Front L/R,
SL SB SR
Center,
9
Surround L/R,
Surround back
*
L/R
*
Surround back and presence speakers do not output sound
simultaneously. You can set to prioritize either set of speakers
in SOUND MENU (see page 63).
8
After you have finished the settings, press n,
then press l / h to select:
SET
To apply the changes.
CANCEL
To cancel the setup.
1 BASIC MENU 2/2
.
ROOM SIZE=MEDIUM
If you select "SET", you will hear a test tone from
each speaker.
32
NONE
Front L/R
L L C R
—
SL SB SR
Front L/R,
L L C R
—
Center
SL SB SR
Front L/R,
L L C R
Surround L/R
SL SB SR
Front L/R,
L L C R
Center,
SL SB SB SR
Surround L/R
Front L/R,
L L C R
Center,
SL SB SR
Surround L/R,
Surround back
Front L/R,
L L C R
Center,
SL SB SR
Surround L/R,
Surround back
L/R
— —
*
— —
[SET
CANCEL
9
Press n to select CHECK OK?, then press
l / h to select:
YES
To exit the setup if the test tones were
satisfactory.
NO
To adjust each speaker level (see page 60).
1 BASIC MENU 2/2
. CHECK OK?;;;;YES
B)SPEAKER LEVEL
.
Memory back-up
The memory back-up circuit prevents the stored data
from being lost even if this unit is in the standby mode.
However, if the power cord is disconnected from the
AC outlet, or the power supply is cut for more than one
week, the stored data will be lost. If so, adjust the
items again.
(when "NO" is selected)
- +
FR
C
SL