WAGNER Super Finish 23 PLUS Mode D'emploi page 35

Super Finish 23 PLUS
Contents
1 SAFETY REGULATIONS FOR AIRLESS SPRAYING 36
1.1 Flash point _________________________________ 36
1.2 Explosion protection _________________________ 36
1.3 Danger of explosion and fire from sources of
ignition during spraying work _________________ 36
1.4 Danger of injury from the spray jet _____________ 36
1.5 Secure spray gun against unintended operation __ 36
1.6 Recoil of spray gun __________________________ 36
1.7 Breathing equipment as protection against
solvent vapors ______________________________ 36
1.8 Prevention of occupational illnesses ____________ 36
1.9 Max. operating pressure ______________________ 37
1.10 High-pressure hose _________________________ 37
1.11 Electrostatic charging
(formation of sparks or flames) ________________ 37
1.12 Use of units on building sites and workshops _____ 37
1.13 Socket at the unit ___________________________ 37
1.14 Ventilation when spraying in rooms ____________ 37
1.15 Suction installations _________________________ 37
1.16 Earthing of the object ________________________ 37
1.17 Cleaning the unit with solvents ________________ 37
1.18 Cleaning the unit ___________________________ 37
1.19 Work or repairs at the electrical equipment ______ 37
1.20 Work at electrical components _________________ 38
1.21 Setup on an uneven surface ___________________ 38
2 GENERAL VIEW OF APPLICATION ____________ 38
2.1 Application ________________________________ 38
2.2 Coating material ____________________________ 38
2.2.1 Coating materials with sharp-edged additional
materials __________________________________ 38
2.2.2 Filtering ___________________________________ 39
3. DESCRIPTION OF UNIT _____________________ 39
3.1 Airless process ______________________________ 39
3.2 Functioning of the unit _______________________ 39
3.3 Explanatory diagram _________________________ 40
3.4 Transportation ______________________________ 40
3.5 Trolley backfitting __________________________ 41
3.6 Technical data ______________________________ 41
4 STARTUP _________________________________ 42
4.1 Unit with suction system _____________________ 42
4.2 unit with upper hopper (5 litres) _______________ 42
4.3 high pressure hose and spray gun ______________ 42
4.4 Connection to the mains network ______________ 42
4.5 Socket on unit (not included in all models) _______ 43
4.6 Cleaning preserving agent when starting-up of
operation initially ___________________________ 42
4.7 Ventilate unit (hydraulic system) if the sound of
inlet valve is not audible ______________________ 42
4.8 Taking the unit into operation with
coating material ____________________________ 42
5 SPRAYING TECHNOLOGY ___________________ 44
6 HANDLING THE HIGH-PRESSURE HOSE _______ 44
7 INTERRUPTION OF WORK ___________________ 44
8 CLEANING THE UNIT _______________________ 45
8.1 Cleaning the unit from the outside _____________ 46
8.2 Suction filter _______________________________ 46
8.3 High-pressure filter __________________________ 46
8.4 Cleaning the Airless spray gun _________________ 47
9 SERVICING ________________________________ 47
9.1 General servicing ___________________________ 47
9.2 High-pressure hose __________________________ 47
10 REPAIRS AT THE UNIT ______________________ 48
10.1 Inlet valve Pusher ___________________________ 48
10.2 Inlet valve _________________________________ 48
10.3 Outlet valve ________________________________ 49
10.4 Pressure control valve ________________________ 49
10.5 Replacing the power cable ___________________ 50
10.6 Typical wear parts ___________________________ 50
10.7 Connection diagram _________________________ 51
10.8 Remedy in case of faults ______________________ 52
11 SPARE PARTS AND ACCESSORIES ____________ 53
11.1 Super Finish 23 PLUS accessories _______________ 53
11.2 Spare parts list Super Finish 23 PLUS ___________ 58
11.3 Spare parts list high-pressure filter _____________ 60
11.4 Spare parts List Trolley _______________________ 60
11.5 Spare parts List frame ________________________ 61
11.6 Spare parts list suction system (rigid) ___________ 61
11.7 Spare parts list hopper 5l _____________________ 62
11.8 Spare parts list hopper with TopClean ___________ 62
Testing of the unit ________________________________ 63
Important information on product liability_____________ 63
Note on disposal __________________________________ 63
Guarantee declaration _____________________________ 63
CE - declaration__________________________________ 129
European service network _________________________ 132
GB
CONTENTS
35