LERICA LEVAC C30 M8 Mode D'emploi Et D'entretien page 50

MAINTENANCE
GB
7.4.3 CHANGING THE PUMP EXHAUST FILTER
WARNING: This operation must be carried out by qualified personnel.
1) Remove the stainless steel panel on the rear of the machine.
2) Unscrew plug (A) on the pump body using pliers.
3) Remove filter (B) from its seat.
4) Insert the new filter after checking to make sure 'O-ring (C) is in the correct position.
5) Refit the cover by fixing spring (D) on the filter projection (E).
7.4.4 CHANGING THE LID GASKET AND RED SILICONE
1) Open the plexiglas cover.
2) Remove cover gasket (F) or the red silicone strip (G) and clean the
seats to remove dirt.
3) Insert the new gasket pushing it deep into the cavity all the way.
4) Run a loadless cycle so that the gasket fits firmly into its seat.
GB
Operation and maintenance manual / Ed. 10 - 2005
A
•
C
•
•
•
D E
F
•
50
V ACUUM CHAMBER
PACKAGING MACHINES
B
G
•
REV. 00 - Cod.: 1500228