LERICA LEVAC C30 M8 Mode D'emploi Et D'entretien page 39

VACUUM CHAMBER
PACKAGING MACHINES
WARNING! THE PUMP OIL MUST BE CHANGED PERIODICALLY; THE OIL CHANGE FREQUENCY MUST BE INCREASED
PROPORTIONALLY TO THE WORKLOAD TO WHICH THE MACHINE IS SUBJECTED. THE OIL MUST BE CHANGED EVERY
15,000 OPERATING CYCLES (CORRESPONDING TO APPROX. 100 HOURS OF OPERATION) THE PUMP EXHAUST FILTER
MUST BE REPLACED EVERY SECOND OIL CHANGE.
The oil and filter change frequency increases if liquids or wet products are handled; in such cases, the oil must be changed if the
machine has remained unused for a month or a longer period. A whitish, cloudy or dark and transparent oil means suction of
liquids and moisture, or that the oil is old, respectively.
All models, are provided with an oil change indicator system: after 15,000 operating cycles, when the machine is started up and
at the end of each cycle, the display indicates an "oil alarm". The number of work cycles performed can be read at any moment
by means of the keys on the control panel (See page 40).
ATTENTION! Do not touch the sealing bars after sealing a bag as they may be very hot (Fig. 1).
WARNING! Do not remove the Teflon cover on the sealing bars; do not use knives or other sharp tools to remove residua from
the sealing bar: always wait for the bars to cool down before using blunt tools.
WARNING! Clean the machine thoroughly after use; clean the plexiglas cover using only a cloth dipped in water, avoid cleaning
liquids and solvents. Use the special products available on the market for cleaning the stainless steel parts. Do not use water or
steam jets as this can damage the machine's electrical equipment.
For all problems (defective working or technical assistance) please contact our Customer Service.
REV. 00 - Cod.: 1500228
NO!
Fig. 1
39
INSTALLATION
Operation and maintenance manual / Ed. 10 - 2005
GB
GB