Sony DAV-FR10W Mode D'emploi page 92

b)
When you perform the Quick Setup (page 33),
the default settings are changed.
c)
This setting appears when you set the
corresponding speaker to "Y" in "SP SETUP"
(page 91).
xLEVEL
TEST TONE
(test tone)
F BALANCE
(front
balance)
0
CEN LEVEL
(center level)
a)
0
SL LEVEL
(surround
left level)
a)
0
SR LEVEL
(surround
right level)
a)
0
SB LEVEL
(surround
back level)
a)
0
SW LEVEL
(subwoofer
level)
a)
+4
AUDIO DRC
(dynamic
compression)
a)
When you perform the Quick Setup (page 33),
the default settings are changed.
b)
This setting appears when you set the
corresponding speaker to "Y" in "SP SETUP"
(page 91).
US
92
T. TONE OFF: The test tone is
not emitted from the speakers.
T. TONE ON: The test tone is
emitted from both left and
right speakers simultaneously
while adjusting balance. When
you select one of the
"LEVEL" items, the test tone
is emitted from each speaker in
sequence.
Adjusts the balance between
the front left and right
speakers. (You can adjust from
the center 6 steps left (L6) or
right (R6).)
b)
Adjusts the level of the center
speaker (–6 dB to +6 dB, 1 dB
increments).
b)
Adjusts the left level of the
surround speaker (–6 dB to +6
dB, 1 dB increments).
b)
Adjusts the right level of the
surround speaker (–6 dB to +6
dB, 1 dB increments).
b)
Adjusts the level of the
surround back speaker (–10
dB to +10 dB, 1 dB
increments).
Adjusts the level of the
subwoofer (–6 dB to +6 dB, 1
dB increments).
DRC OFF: No compression of
DYNAMIC range.
DRC ON: Reproduces the
sound track with the kind of
DYNAMIC range that the
recording engineer intended.
xCUSTOMIZE
DUAL MONO MAIN
(dual mono)
SUB
MAIN+SUB
MAIN/SUB
For details, see "Enjoying
Multiplex Broadcast Sound
(DUAL MONO)" on page 77.
a)
SL SR REV
OFF
(reverse the
ON
surround
For details, see "When placing
speaker
the surround speaker (L) in the
position)
(R) position" on page 27.
b)
SB DEC
SB MATRIX
(surround
SB AUTO
back
SB OFF
decoding)
For details, see "Selecting the
Surround Back Decoding
Mode" on page 63.
DIMMER DIM OFF
(dimmer)
DIM ON
For details, see "Changing the
Brightness of the Front Panel
Display" on page 81.
a)
This setting appears when you set "SURR SP"
to "SURR Y" in "SP SETUP."
b)
This setting appears when you set "SURR SP"
to "SURR Y" and "SURR B SP" to "SURR B
Y" in "SP SETUP."