Sony DAV-FR10W Mode D'emploi page 89

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

x LEVEL
You can vary the level of each speaker as
follows. Be sure to set [TEST TONE] to [ON]
for easy adjustment.
CENTER
Adjusts the level of the center
0 dB*
speaker (–6 dB to +6 dB, 1 dB
(appears when
increments).
you set
[CENTER] to
[YES] in the
[SIZE] setting.)
SURROUND
Adjusts the level of the surround
LEFT 0 dB*
speakers (–6 dB to +6 dB, 1 dB
SURROUND
increments).
RIGHT 0 dB*
(appears except
when you set
[SURROUND] to
[NONE] in the
[SIZE] setting.)
SURROUND
Adjusts the level of the surround
BACK
back speaker (–10 dB to +10 dB,
0 dB
1 dB increments).
(appears when
you set
[SURROUD
BACK] to [YES]
in the [SIZE]
setting.)
SUBWOOFER
Adjusts the level of the subwoofer
+4 dB*
(–6 dB to +6 dB, 1 dB increments).
* When you perform the Quick Setup (page 33), the
default settings are changed.
x BALANCE
You can vary the balance of the left and right
speakers as follows. Be sure to set [TEST
TONE] to [ON] for easy adjustment.
FRONT
Adjusts the balance between the front
(CENTER)
left and right speakers.
The center position is shown as
"---." (You can adjust from the center 6
steps to left or right.)
To adjust the volume of all the
speakers at one time
Use the VOLUME control on the system, or
press VOL +/–.
x TEST TONE
The speakers will emit a test tone to adjust
[LEVEL] and [BALANCE].
OFF
The test tone is not emitted from the
speakers.
ON
The test tone is emitted from both left and
right speakers simultaneously while
adjusting balance. When you select one of
the [SPEAKER SETUP] items, the test
tone is emitted from each speaker in
sequence.
89
US

Publicité

Chapitres

Table des Matières
loading

Table des Matières