Buffer Batteries Changing - Secomam UviLine Serie Manuel D'utilisation

Spectrophotometre
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

1.68

BUFFER BATTERIES CHANGING

Information
Only use leak proof alkaline manganese batteries. If you leave the spectrophotometer switched on during the exchange or insert the
new batteries within a minute after taking out the old ones, the date and time are retained in the spectrophotometer.
1.
Turn on the spectrophotometer upside down and place it on a soft surface.
2.
Remove the cover (1) of batteries compartment.
3.
Remove out of the compartment the old batteries.
4.
Insert the four new batteries in the battery compartment. Make sure that the poles of the batteries are in the correct position.
5.
The ± signs on the batteries must correspond to the ± signs in the battery compartment.
6.
Close the batteries compartment cover.
Batteries time life
The power consumption of the clock is very low. The lifetime of high quality batteries is at least 5 years.
Gamme UviLine
- 110 -

Publicité

Chapitres

Table des Matières
loading

Table des Matières