Choice Of The Language; Date And Time Setting Up - Secomam UviLine Serie Manuel D'utilisation

1.18

CHOICE OF THE LANGUAGE

During the initial commissioning, the spectrophotometer automatically guides the user through the setting of the meter
language, date and time after switching on (see following sections).
- Press key. <ON/OFF> the spectrophotometer is switched on.
1. With « » and «
2. Confirm the choice with <START·ENTER> key.
The language has been set.The currently selected language is marked by a check.
NOTE: After the initial commissioning, the operator can change the language at any time. From the main menu <HOME>
enter in the menu "General setup", then "Language" menu.
1.19

DATE AND TIME SETTING UP

During the initial commissioning, the instrument automatically guides the operator to the setting of the time and date after
the setting of the language.
The menu « Date / Time » is opened.
1. With « » and «
2. The input field for the current date pops up.
3. Enter the current date with <0...9> keys and confirm.
4. The input field closes. The date is accepted.
5. Select « Time » and confirm.
6. The input field for the current hour pops up.
» keys, select the language.
» keys, select one option from the menu. Valid this option with <START·ENTER> key.
- 28 -
UviLine Series