Method Execution - Secomam UviLine Serie Manuel D'utilisation

UviLine Series
1.49

METHOD EXECUTION

In the "Kinetics mode" select a method with «
» and « » keys and- Press on <START·ENTER> key to confirm the
method choice. Then -press <ZERO BLANK> key
- Insert sample.
- Press <START ENTER> key to start the measurement. The spectrophotometer starts recording automatically.
- Wait the end of measurement.
Stopping the recording:
- Press on F4 key [Stop] to terminate the recording prematurely. The curve recorded up to this point can be stored and
edited (see paragraph 12.8.3).
- Press on <ESC> key to completely cancel measurement. The curve recorded up to this point is discarded.
After the specified Duration has expired, the cursor appears.
- Press on <START ENTER> key to run a new measurement.
- 70 -