Timer; Software Updating - Secomam UviLine Serie Manuel D'utilisation

Gamme UviLine

Registered user.
1.65

TIMER

This « Timer » menu allows storing in memory a waiting time before to start a measurement (Ex: Incubation time of a react ional
mixture). This « Timer » acts like a stop watch.
- Press
<TIMER> key
- Press F3 key [Edit] to enter a delay.
- Press F1 key [Start] to start the time count down.
- Press F2 key [Stop] to stop the time count down.
When the programmed delay is ended,

The timer displays 00:00:00,

Its status commutes from « Running » to « Expired » and

One can hear a "bip". Press F2 key [Stop] to deactivate the timer.
NOTE:
The [Add] function key is only displayed if a method is selected for which analysis timers were programmed in concentration mode.
Press < timer > in the concentration mode.
1.66

SOFTWARE UPDATING

The software and method update is used to continuously update the spectrophotometer.
Remark
Only users of the user group, Administrator are allowed to carry out a software and method update.
The update comprises

The newest firmware (meter software)

New or changed method data
Data transfer to the spectrophotometer can be made with USB medium as a temporary storage
To realize the update, new software version or new methods have to be recording on USB medium. This one has to be connected to
the spectrophotometer.
Execution
1. Connect the USB medium to the PC.
2. Unpack the contents and complete folder structure of the downloaded exe or zip file in the main directory (top level) of the
USB medium (If an unpacking program such as WinZip is used, the option, "Nutze Ordnernamen" or "Use Folder Names"
must be set).
- 107 -