Method Execution - Secomam UviLine Serie Manuel D'utilisation

UviLine Series
1.35

METHOD EXECUTION

» keys and confirm with <START·ENTER> key in the mutli-wavelenght" mode.
- Select a method with « » and «
- Enter de variables values by using F4
- Press <ZERO BLANK> key
- Zero is performed at the programmed wavelengths.
- Press <START ENTER> key to start the sample measurement.
It displays at the same time the absorbance values (or transmittance values) of the sample read at the different
wavelengths.
- Press on F3 key [Transmission] to have the transmission values (%).
- Press on <START ENTER> key to run a new measurement.
- If the condition is not met, folowing message is displayed
- 54 -