KERN MPC M Serie Mode D'emploi page 99

3.
(Setting P Prt, P Auto, P Cont only!)
The currently set data output format will be displayed after the Baud rate has
been confirmed. Select desired format by
4.
LP 50
tPUP
Pin
Service menu
Operate adjustment switch; for position see chap.15
15*
30
Display speed
60
7.5
Adjustment, see chap. 18
tri*
CoUnt
rESEt
SEtGrA
MPC_M / MPE_HM / MPE_PM-BA-e-1414
Data output format
Prt 0-3 Data output format, see chap. 13.3
Cont 1 Default
Cont 2 Not documented
Cont 3 Not documented
Printer type
The currently set printer type will be displayed after the data output format
has been confirmed.
Select desired printer type by pressing
Not documented
Use this setting
Password Input: Press
subsequently.
Not documented
Not documented
Not documented
Reset weighing scale to factory setting
Not documented
and confirm with .
Sd0 – on/off
Continuous data output,
selectable "Sending 0" yes /
no
and confirm with .
, ,
41