Roland SonicCell SRX Serie Mode D'emploi page 247

❍Volume (Controller number 7)
Status 2nd byte
BnH 07H
n = MIDI channel number:
vv = Volume:
* Not received in Performance mode when the Receive Volume
parameter (Performance MIDI) is OFF.
* In Performance mode the Part Level parameter (Part Edit) will
change.
❍Balance (Controller number 8)
Status 2nd byte
BnH 08H
n = MIDI channel number:
vv = Balance:
❍Panpot (Controller number 10)
Status 2nd byte
BnH 0AH
n = MIDI channel number:
vv = Panpot:
* Not received in Performance mode when the Receive Pan
parameter (Performance MIDI) is OFF.
* In Performance mode the Part Pan parameter (Part Edit) will
change.
❍Expression (Controller number 11)
Status 2nd byte
BnH 0BH
n = MIDI channel number:
vv = Expression:
* Not received when Tone Receive Expression parameter (Patch Ctrl
or Rhythm General) is OFF.
* Not received in Performance mode when Receive Expression
parameter (Performance MIDI) is OFF.
❍Hold 1 (Controller number 64)
Status 2nd byte
BnH 40H
n = MIDI channel number:
vv = Control value: 00H - 7FH (0 - 127) 0-63 = OFF, 64-127 = ON
* Not received when Tone Receive Hold-1 parameter (Patch Ctrl or
Rhythm General) is OFF.
* Not received in Performance mode when Receive Hold-1
parameter (Performance MIDI) is OFF.
❍Portamento (Controller number 65)
Status 2nd byte
BnH 41H
n = MIDI channel number:
vv = Control value: 00H - 7FH (0 - 127) 0 - 63 = OFF, 64 - 127 = ON
* In Performance mode the Part Portamento Switch parameter (Part
Edit) will change.
3rd byte
vvH
0H - FH (ch.1 - 16)
00H - 7FH (0 - 127)
3rd byte
vvH
0H - FH (ch.1 - 16)
00H - 7FH (0 - 127)
3rd byte
vvH
0H - FH (ch.1 - 16)
00H - 40H - 7FH (Left - Center - Right)
3rd byte
vvH
0H - FH (ch.1 - 16)
00H - 7FH (0 - 127)
3rd byte
vvH
0H - FH (ch.1 - 16)
3rd byte
vvH
0H - FH (ch.1 - 16)
❍Sostenuto (Controller number 66)
Status 2nd byte
BnH 42H
n = MIDI channel number:
vv = Control value: 00H - 7FH (0 - 127) 0 - 63 = OFF, 64 - 127 = ON
❍Soft (Controller number 67)
Status 2nd byte
BnH 43H
n = MIDI channel number:
vv = Control value: 00H - 7FH (0 - 127) 0 - 63 = OFF, 64 - 127 = ON
❍Legato Foot Switch (Controller number 68)
Status 2nd byte
BnH 44H
n = MIDI channel number:
vv = Control value: 00H - 7FH (0 - 127) 0 - 63 = OFF, 64 - 127 = ON
* In Performance mode the Part Legato Switch parameter (Part Edit)
will change.
❍Hold-2 (Controller number 69)
Status 2nd byte
BnH 45H
n = MIDI channel number:
vv = Control value:
* A hold movement isn't done.
❍Resonance (Controller number 71)
Status 2nd byte
BnH 47H
n = MIDI channel number:
vv= Resonance value (relative change) : 00H - 40H - 7FH (-64 - 0 - +63)
* In Performance mode the Part Resonance Offset parameter (Part
Edit) will change.
❍Release Time (Controller number 72)
Status 2nd byte
BnH 48H
n = MIDI channel number:
vv = Release Time value (relative change) : 00H - 40H - 7FH (-64 - 0 - +63)
* In Performance mode the Part Release Offset parameter (Part Edit)
will change.
❍Attack time (Controller number 73)
Status 2nd byte
BnH 49H
n = MIDI channel number:
vv = Attack time value (relative change) : 00H - 40H - 7FH (-64 - 0 - +63)
* In Performance mode the Part Attack Offset parameter (Part Edit)
will change.
Implémentation MIDI
3rd byte
vvH
0H - FH (ch.1 - 16)
3rd byte
vvH
0H - FH (ch.1 - 16)
3rd byte
vvH
0H - FH (ch.1 - 16)
3rd byte
vvH
0H - FH (ch.1 - 16)
00H - 7FH (0 - 127)
3rd byte
vvH
0H - FH (ch.1 - 16)
3rd byte
vvH
0H - FH (ch.1 - 16)
3rd byte
vvH
0H - FH (ch.1 - 16)
247