Sony BRAVIA KDS-70R2000 Mode D'emploi page 44

Connecting to the TV (rear)
DVD recorder
VCR
Decoder
VCR
DVD player
S VHS/Hi8/
DVC camcorder
with S-Video
output
Digital receiver
DVD player
Digital audio (PCM)
component
44
GB
Video game
equipment
DVD player
Decoder
DVD player with
component output
(for only
HDMI IN 6)
PC
Hi-Fi audio
equipment
To connect Do this
Video game Connect to the scart socket
equipment, DVD
player or decoder decoder, the scrambled signal from
E
the TV tuner is output to the
decoder, then the unscrambled
signal is output from the decoder.
DVD recorder or Connect to the scart socket
VCR that supports
SmartLink F
between the TV and a VCR/DVD
recorder.
VCR, DVD player Connect to the scart socket
or S VHS/Hi8/DVC
camcorder with S- input signals by setting "AV3
Video output G
Input" in the "AV Set-up" menu
(page 34). If the equipment has an
S Video socket, connect it through
an S Video - scart adaptor interface
(not supplied).
DVD player with Connect to the component sockets
component output and the audio sockets
H
Digital receiver or Connect to the HDMI IN 5 or 6
DVD player I
socket if the equipment has a
HDMI socket. The digital video
and audio signals are input from
the equipment. If the equipment
has a DVI socket, connect the DVI
socket to the HDMI IN 6 socket
through a DVI - HDMI adaptor
interface (not supplied), and
connect the equipment's audio out
sockets to the audio in the HDMI
IN 6 sockets.
Notes
• The HDMI sockets only support
the following video inputs: 480i,
480p, 576i, 576p, 720p, 1080i and
1080p. To connect a PC, use the
PC IN
• Be sure to use only an HDMI
cable that bears the HDMI logo.
PC J
Connect to the PC
use a PC cable with ferrites.
1. When you connect the
2. SmartLink is a direct link
/ 3. You can select the
/
RGB/ sockets.
IN RGB/
sockets. It is recommended to
/
/
/
4.