Set-Up Menu; Timer Settings; Auto Start-Up; Power Saving - Sony BRAVIA KDS-70R2000 Mode D'emploi

Set-up menu

Timer Settings

Auto Start-up

Power Saving

Sets the timer to switch on/off the TV.
Sleep Timer
Sets a period of time after which the TV automatically switches itself into standby
mode.
When the Sleep Timer is activated, the
lights up in orange.
Tips
• If you switch off the TV and switch it on again, "Sleep Timer" is reset to "Off".
• "TV will soon turn off by Sleep Timer" appears on the screen one minute before the TV
switches to standby mode.
On Timer
Sets the timer to switch on the TV from standby mode.
"Day": Selects the day on which you want to activate the On Timer.
"Time": Sets the time to switch on the TV.
"Duration": Selects the time period after which the TV automatically switches to
standby mode again.
"Volume Set-up": Sets the volume for when the timer switches on the TV.
Clock Set
Allows you to adjust the clock manually. When the TV is receiving digital channels,
the clock cannot be adjusted manually since it is set to the time code of the
broadcasted signal.
Starts the "first time operation menu" to select the language and country/region, tune
in all available digital and analogue channels, and set the time (only when no digital
channels are received). Usually, you do not need to do this operation because the
language and country/region will have been selected and channels already tuned
when the TV was first installed (page 7, 8). However, this option allows you to
repeat the process (e.g. to retune the TV after moving house, or to search for new
channels that have been launched by broadcasters).
Reduces the power consumption by adjusting the lamp brightness. This also
enhances the black level. Select "Auto" (only for KDS-70R2000), "On" or "Off".
You can select the options listed below on the Set-up
menu. To select options in "Settings", refer to "Picture
menu" (page 25).
(Timer) indicator on the TV (front)
Continued
31
GB