Av Set-Up Menu - Sony BRAVIA KDS-70R2000 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

AV Set-up menu

AV Preset
AV3 Input
AV7 Input
AV2 Output
34
GB
Assigns a name to any equipment connected to the side and rear sockets. The name
will be displayed briefly on the screen when the equipment is selected. You can skip
input signals from connected equipment that you do not want displayed on the
screen.
F
f
1
Press
/
to select the desired input source, then press
F
f
2
Press
/
to select the desired option below, then press
Equipment labels: Uses one of the preset labels to assign a name to connected
equipment.
"Edit:": Creates your own label. Follow steps 2 to 4 of "Programme Labels" (page 36).
"Skip": Skips an unnecessary input source.
Sets a signal to be input through the socket labelled
the TV.
"Auto": Switches automatically among the signals of RGB input, S video input,
Composite video input depending on the input signal.
"RGB": Inputs the RGB signal.
"S Video": Inputs the S Video signal.
"Composite": Inputs the Composite video signal.
Sets a signal to be input through the sockets labeled
the TV.
"Auto": Switches automatically between the component video sockets and the
composite video sockets depending on the cable connection.
"Component": Activates the component video sockets.
"Composite": Activates the composite video sockets.
Tip
When multiple cables are connected and "Auto" is selected, "Component",
"Composite" will be activated in that order.
Sets a signal to be output through the socket labelled
TV. If you connect a VCR or other recording equipment to the
you can then record from the equipment connected to other sockets of the TV.
"TV": Outputs a broadcast.
"AV1": Outputs signals from equipment connected to the
"AV3": Outputs signals from equipment connected to the
"AV7": Outputs signals from equipment connected to the
"Auto": Outputs whatever is being viewed on the screen (except signals from the
4, HDMI IN 5, HDMI IN 6 and PC IN
/
You can select the options listed below on the AV Set-
up menu. To select options in "Settings", refer to
"Picture menu" (page 25).
RGB/
.
.
/
/
3 on the rear of
/
/
7 on the front of
/
2 on the rear of the
/
2 socket,
/
1 socket.
/
/
3 socket.
/
7 socket.
sockets).

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Bravia kds-55a2000

Table des Matières