Sony BRAVIA KDS-70R2000 Mode D'emploi page 32

Film Mode
i Volume
(headphone volume)
i Speaker Link
(headphone speaker
link)
Speaker
Audio Out
Cooling Mode
Lamp Replacement
Display Position
Language
Information
32
GB
Provides smoother picture movement when playing DVD or VCR images taken on
film, reducing picture blur and graininess.
"Auto 1": For a stable picture with minimal noise. Set to "Auto 2" if the screen is
partially degraded.
"Auto 2": Use this setting for standard use.
"Off": Turns off the Film mode.
Notes
• Even if "Auto 1" or "Auto 2" is selected, "Film Mode" will be automatically turned off and
a moving image will not be played smoothly if the image contains irregular signals or too
much noise.
• Film Mode is not available when using Freeze or PAP features, or when watching 480p,
576p, 720p, 1080i or 1080p sources.
Adjusts the volume of the headphones when "i Speaker Link" is set to "Off".
Switches the TV's internal speakers on/off when headphones are connected.
"On": Sound is output only from headphones.
"Off": Sound is output from both the TV and headphones.
Switches on/off the TV's internal speakers.
"On": The TV speakers are turned on in order to listen to the TV's sound through the
TV speakers.
"Off": The TV speakers are turned off in order to listen to the TV's sound only
through your external audio equipment connected to the audio output sockets.
"Variable": The audio output from your audio system can be controlled by the TV's
remote.
"Fixed": The audio output of the TV is fixed. Use your audio receiver's volume
control to adjust the volume (and other audio settings) through your audio system.
Select "High" to use the TV at an altitude of 1,500 m or higher, or to use the TV in
certain circumstances where there is a considerable rise in temperature inside the
TV. Select "Normal" to use the TV at normal altitudes.
When the lamp nears the end of its life, a message appears every time you switch on
the TV. After you replace the lamp, select this option and follow the on-screen
procedure.
Notes
• Select this option after you replace the lamp.
• Depending on environmental and other conditions, such as frequency of use, some lamps
may burn out before the lamp replacement message appears on the screen.
• Until you set the Lamp Replacement option, a message announcing that the lamp is at the
end of its life will appear every time you switch on the TV.
Adjust the horizontal/vertical position of the picture including menu displays and
messages, etc. on the TV screen.
Selects the language in which the menus are displayed.
Displays your TV's product information.