Gross/Net/Tare Recall Operation; Unit Switch Operation - OHAUS Trooper Manuel D'instructions

EN-8
3. OPERATION (Cont.)
Gross
Net
Tare
Net
Net

3.5 Gross/Net/Tare Recall Operation

When a container has been placed on the platform and
tared, it's weight is stored in memory. Adding material to
the container is shown as NET weight. The gross weight is
a combination of the tared weight and the material. The G/
N/T/ MENU button allows switching between GROSS, NET
and TARE weights.
Repeatedly press (short presses) the G/N/T/ MENU but-
ton to cycle through Gross, Tare and Net readings. The
sample illustrations indicate a tare weight of 2kg simu-
lating a container, a net weight of 8kg which would be
the material in a container and a gross weight of 10kg
which is the total weight of the container and material.
After 3 seconds, display returns to Net weight.

3.6 Unit Switch Operation

To switch measuring units, proceed as follows:
Press and hold PRINT/ UNITS button until display
changes to selected measuring unit. Depending on which
units are enabled in the menu, you have a choice of g,
lb, kg or oz. The display sample indicates 8kg load
changed to lbs shown as a net weight because a tared
weight of 2kg was used and stored in memory.
Trooper Scale