Installation; Unpacking And Checking; Selecting The Location; Connecting Power - OHAUS Trooper Manuel D'instructions

Trooper Scale

2. INSTALLATION

2.1 Unpacking and Checking

Open the package and remove the instrument and the accessories. Check the completeness of the delivery. The follow-
ing accessories are part of the standard equipment of your new Scale.
Remove packing material from the instrument.
Check the instrument for transport damage. Immediately inform your Ohaus dealer if you have complaints or parts are
missing. Your Trooper Scale package should contain:
• Trooper Scale
• Warranty card
• AC power adapter
• Instruction Manual
• Lead seal for weights and measures sealing
Store all parts of the packaging. This packaging guarantees the best possible protection for the transport of your
instrument.
NOTE: Remove the two shipping screws if present on top of the unit.

2.2 Selecting the Location

The Scale should be used in an environment which is free from corrosives, vibration or temperature extremes. These
factors will affect displayed weight readings. The Scale should be located on a stable level surface and kept away from
vibrating sources such as large machinery. Maximum accuracy will be achieved when the area is clean and vibration
free.

2.3 Connecting Power

2.3.1 Battery Installation

Remove battery cover and insert 6 Alkaline C-type batteries into the battery holder making sure that the batteries are
properly orientated (correct polarity).
NOTE: It is recommended that when the Trooper Scale is operated from batteries, the Auto-Off Timer feature be turned
on to extend battery life. When setting up the Scale, refer to Intial Setup, Readout menu, paragraph 4.4.4.

2.3.2 AC Power

Connect the AC power cord from the Scale and plug into a convenient power outlet.
NOTICE:
The socket/outlet must be installed near
the equipment and shall be easily accessible.
EN-5