My Devices" Screen; Adding An Egc-Compatible Device - Oase InScenio Notice D'emploi

- EN -
7.2

"My devices" screen

"My devices" screen
1 Already added devices
2 Add new device
Adding a device name
· Select the device and tap the touch symbol.
Removing a device
· Select the device and tap the touch symbol.
7.2.1

Adding an EGC-compatible device

"My devices" screen
A maximum of 10 EGC-compatible devices can be added to the InScenio EGC Controller .
How to proceed:
1. Tap to open the list with available OASE devices.
– When the list is opened, the InScenio EGC Controller automatically searches for connected EGC de-
vices. The EGC devices must be correctly connected to the EGC network and switched on so that the
InScenio EGC Controller can find the EGC devices. Found devices are displayed in colour in the list and
the message "Device found" is shown underneath the product name.
– EGC-compatible devices are marked with the EGC logo (Easy Garden Control) in the product image.
– To search for connected EGC devices again, tap
2. Select the desired EGC-compatible device in the list.
– Only EGC devices found by the InScenio EGC Controller in the EGC network can be added.
– For information on the device, tap . If the following prompt is confirmed with "OK", the OASE homepage
with the relevant product information opens in your browser.
22
.
EGC0019