Operating The Pump Via Egc - Oase InScenio Notice D'emploi

7.1.1

Operating the pump via EGC

"Home" screen
The OASE product name will be displayed at the top right of the screen. The added device can be labelled
with an individual name.
1 Tiles for operation and display of current values.
2 Switching the device on or off.
· Tap the touch symbol "On" to switch on the device.
· Tap the touch symbol "Off" to switch off the device.
3 Status display of the EGC connection
· Status display lights up green:
– The connection between the EGC device and InScenio EGC Controller is active.
· Status display lights up grey and the product image is greyed out:
– No connection between EGC device and InScenio EGC Controller.(→ Remedy of faults)
Questions, problems, missing parts?
Before returning to your retailer, call us at 1-866-627-3435, 8 a.m.-6 p.m., EST, Monday-Friday, or email
us at customercare@oase-livingwater.com. Or visit our website at www.oase-livingwater.com
Dynamic Function Control (DFC)
Only available for pumps supporting this function. The DFC function is described in the ope-
rating manual of the pump.
How to proceed:
1. Tap "On" or "Off" to switch the DFC function on or off.
– If the DFC function is on, the current Scene is displayed.
2. To change the Scene, touch the number of the Scene and hold it for 2 seconds.
– A dialogue field will open.
– Different Scene are available.
3. Select the desired Scene.
4. Tap ʺOKʺ to apply the setting.
– The Scene number is displayed in the tile.
5. To cancel the process, tap "Cancel".
- EN -
FMR0037
15