Using The Device - STEAMAX PRIV V8 Manuel D'utilisation

STEAMAX PRIV V8 – USING THE DEVICE
Notes on Using the Device for the First Time
Fully charge the required replaceable 18650 battery before first use. We recommend using high-
drain cells with a discharge current of ≥ 25A. Please note the positive and negative poles in the
battery compartment. Ensure that there is no visible damage to the surface of the battery cells.
The device has a 510-pin connection with a spring-loaded connector, making it suitable for a
variety of sub-ohm-capable clearomizers.
How to Install the Battery
Open the battery compartment and then place the charged 18650 battery in the device according
to the poles indicated. Close the battery compartment.
Note for Cleaning
Use a dry cloth or cotton swab to clean the device.
53
www.steamax.com