Environmental Protection - Dexter power CSC18LD.R Manuel D'utilisation

EN
WARNING: Always maintain proper control of the saw to make sawing safer and easier.
Loss of control of the saw could cause an accident resulting in possible serious injury.
MAINTENANCE
Remove the battery pack from the tool before carrying out any adjustment, servicing or
maintenance.
Your power tool requires no additional lubrication or maintenance.
There are no user serviceable parts in your power tool. Never use water or chemical cleaners to
clean your power tool. Wipe clean with a dry cloth. Regularly clean the tool's air vents and guarding
system with compressed dry air. Do not attempt to clean by inserting pointed objects through
openings.
Always store your power tool and its accessories in a dry place and out of the reach of children.
Keep the motor ventilation slots clean. Keep all working controls free of dust. Occasionally you may
see sparks through the ventilation slots. This is normal and will not damage your power tool.
For battery tools
The ambient temperature range for tool and battery use and storage is 0°C-45°C.
The recommended ambient temperature range for the charging system during charging is
0°C-40°C.

ENVIRONMENTAL PROTECTION

Waste electrical products must not be disposed of with household waste. Please
recycle where facilities exist. Check with your local authorities or retailer for
recycling advice.
DISPOSAL OF AN EXHAUSTED BATTERY PACK
To preserve natural resources, please recycle or dispose of the battery pack properly. This
battery pack contains Li-ion batteries. Consult your local waste authority for information
regarding available recycling and/or disposal options. Discharge your battery pack by
operating your tool, then remove the battery pack from the tool housing and cover the battery pack
connections with heavy-duty adhesive tape to prevent short circuit and energy discharge. Do not
attempt to open or remove any of the components.
132