Remote Control - ECOVACS ROBOTICS WINBOT X Manuel D'instructions

Remote Control

Direction Control
Buttons
Deep Cleaning Mode
Button
RESET Button
Note: To change batteries in Remote Control, pull off the battery cover of Remote Control, take out the old batteries, insert batteries with correct polarity,
and slide the battery cover on the back, ensuring it clicks closed.
2. Package Contents and Technical Specifications
START/PAUSE Button
Remote Control
Pairing Button
Button
Press to control the directions in which WINBOT
Direction Control Buttons
travels.
START/PAUSE Button Press to start/pause WINBOT.
Used to clean windows in both N- and Z- patterns,
Deep Cleaning Mode providing a better cleaning performance. If WINBOT
Button is in AUTO Cleaning Mode, please pause it before
using this function.
1. Press the RESET Button to gain control of WINBOT
if it is stuck;
2. Press RESET once, then press RESET again
RESET Button
and hold it to enter Manual Override Mode and gain
control of WINBOT (see Section 6. Troubleshooting
for details).
Remote Control Pairing Used to pair Remote Control with WINBOT (pairing
Button has been set up by default).
How to Use
9
EN