ECOVACS ROBOTICS WINBOT X Manuel D'instructions page 13

4
Attach the Cleaning Pad (Pre-installed)
5
Spray Cleaning Solution
It is recommended to use WINBOT with WINBOT Cleaning Solution from ECOVACS. Using tap water or other cleaners could have an adverse
effect on cleaning performance. Using other cleaning solutions could potentially void the warranty.
1
Step
Note: Do not over-spray Cleaning Solution as doing so may cause the
driving treads to slip.
3. Operating WINBOT
Note: Make sure the white side of the Cleaning Pad attaches to the fastener.
The Cleaning Pad is not completely square, make sure it does not
cover the Squeegees or Edge Detection Sensors.
2
Step
Note: After spraying, BE SURE to wipe the bottom of WINBOT with a
dry cloth.
13
EN