If Your Fryer Does Not Work Properly - T-Fal FAMILY PRO-FRYER FR403931 Mode D'emploi

ProFryer T-FAL Electro-5082225

If your fryer does not work properly

P
ROBLEMS AND POSSIBLE CAUSES
The appliance is not plugged in.
The CONFIRM button on control panel has not been
pressed.
The control unit returned to standby mode after 30
minutes as the unit was not operated or as no food
was put in the oil after the READY light was on.
The CONFIRM button has not been pressed on control
panel to start the timer.
The Max. marker for filling the bowl has been
exceeded.
The frying basket has been overfilled with food.
Food is wet or contains too much water (frozen food).
Different types of oil/fat have been mixed.
The fat/oil has deteriorated.
The fat/oil is unsuitable.
The window is not cleaned often enough or is not
cleaned the right way.
Food is moist and contains too much water (frozen
food).
Pieces are too thick and contain water.
Too much food is being cooked at the same time and
the cooking oil is not at the right temperature.
The temperature of the frying oil may not be high
enough.
Unwashed food immersed in hot oil.
If you have any product problems, please contact our Consumer Service Department for expert help and
advice:
- in the US 1800 395 8325
- in Canada 1800 418 3325
Consult our web site: www.t-fal.com or www.t-fal.ca.
Any repairs must only be carried out by an Approved Service Center with the manufacturer's own
replacement parts.
8
27/07/06 13:14
The LCD screen of the fryer is not lighting
The fryer is not heating
Timer does not count down after the ready light turns on
Oil overflows
Emits unpleasant smells
Vision through the viewing window is not clear
Food does not become golden, and remains soft.
French Fries stick together
Page 8
S
OLUTIONS
Plug-in the appliance.
Press the CONFIRM button after having chosen the
cooking menu.
Press the CONFIRM button after having chosen the
cooking menu for the second time.
Press the CONFIRM button when lowering the basket
into the oil.
Check the oil level (Max.), and remove the excess.
Check that the basket is not too full.
Remove any ice and dry the food thoroughly. Lower
the basket slowly.
Empty and clean the bowl. Refill the bowl with one
type of oil.
Replace the frying oil (after 12 uses max., more
frequently depending on the oil).
Use a good quality blended vegetable oil.
To ensure good visibility, clean the viewing window by
wiping it with soap and water. Allow the window to dry
at room temperature or dry with a clean cotton cloth.
Clean as often as necessary.
Remove as much ice from the frozen food as possible
before frying.
Experiment by lengthening the cooking time or by
slicing food smaller and thinner.
Fry food in small quantities (especially when frozen).
Check to see that the thermostat is set to the
recommended temperature. If so, experiment with a
slightly higher temperature, monitoring cooking
carefully to avoid burning.
Wash potatoes well and dry them thoroughly.