Introduction; General Warnings - Seac Sub PRO 2000 ADV Instructions

Introduction

Congratulations for having chosen the quality
and reliability of a SEAC Diving Pro product. The
equipment you have purchased was made with
selected and tested materials. Development and
constant research allows us to continually
evolve. Innovative manufacturing processes,
constant controls and testing, as well as testing
under real conditions as conducted in our
research centre, guarantee the reliability that all
SEAC Diving Pro products are known for.
Attention!
This booklet is not a diving manual!
Read this entire manual before using this
equipment!
This manual must be conserved for as long as
you own the product!

General warnings

Before using this stabilizing jacket or any
other underwater diving equipment, you
must follow a course held by a qualified
instructor and obtain the appropriate
certification. The use of diving equipment
by uncertified persons is dangerous and
may cause serious or fatal injuries to the
diver and his companions.
During the assembly and finishing of the
stabilizing jacket, all possible provisions
were made to supply a highly reliable,
long-lasting product.
Such provisions may become ineffective
if the user does not use the stabilizing
jacket correctly and does not maintain it
adequately. SEAC Diving Pro s.r.l. denies
any responsibility for any problem
resulting from a lack of observation of the
recommendations made in this manual.
For any other eventuality, please contact
your authorized SEAC Diving Pro dealer
or SEAC Diving Pro directly. In order to
guarantee maximum safety, every repair
or maintenance intervention must only be
carried out by authorized SEAC Diving
Pro workshops.
SEAC Diving Pro stabilizing jackets are a
result of research conducted in close
collaboration with numerous professional
diving operators.
characteristics guarantee a reliability that
remains unchanged even after an
extensive series of dives. At the same
time, the mechanical and functional
facility allows an extremely simple
maintenance regime.
If you are not expert in the use of this
apparatus, we advise you to study its
functioning during trial dives in shallow
depths and under favourable conditions;
you should then contact a qualified
instructor for a course to update your
skills.
These stabilizing jackets have been
certified according to laws EN 250 and EN
1809, which call for an extensive series of
functional tests up to a maximum depth
of 50 metres and temperatures between -
20°C e + 70°C.
Attention!
These stabilizing jackets have been designed to
be used with normal atmospheric air in
compliance with the provisions in law EN 12001.
ENGLISH
Their innovative
27