Display - Heat Output Indicator, Further Function Menus; Function - Air Distribution Module, Fan Speed Control - Austroflamm Ruby Manuel D'instructions

english
Display – Heat output indicator, further function menus
Heat output level
Heating times
By pressing the appropriate icon, it is possible to switch to the desired setting or function.
The desired heat output can be set by pressing the buttons
Start / Stop
By pressing the
Display – Status indicator
Start / Stop
By pressing the
Function – Air distribution module, fan speed control
An air distribution module is available as an option for the RUBY model. This allows an additional room to be
heated using warm air. The warm air is extracted in front of the rear wall of the firebox.
For installation and any other information, please contact your Austroflamm dealer.
Air distribution module
(optional)
Statistics
button for longer than 2 seconds, the stove is activated or stopped.
Status bar Start / Stop function
Room temperature indicator
button for longer than 2 seconds, the stove is activated or stopped.
5
Tips
Settings
. This setting is accepted immediately.
Back to room
temperature indicator
Start / Stop
function