Austroflamm Ruby Manuel D'instructions page 44

english 9
Menu item: Bluetooth devices
The "SMART SPOT" radio-controlled room thermostat is available for
your pellet stove. This SMART SPOT works via Bluetooth technology.
When used, it must be activated once by selecting this menu item.
Menu item: Eco mode
The ECO MODE allows the stove to be switched ON and OFF automati-
cally at certain temperature settings specified by you.
The cut-off and restart temperatures can be set in the ECO-MODE
menu item.
.
In order to avoid starting / stopping the appliance too frequently, the temperature limits should not be set too
tightly. The stove should burn for at least one hour to reach the operating temperature.
As standard setting, we recommend a restart temperature of 0.5°C and a cut-off temperature of 1.0°C.
Menu item: External thermostat
The stove can also be controlled by an
external thermostat, if required.
Connect the potential-free contact of the
thermostat at input "I03" & "GND" on the main
control unit.
A 2-pin plug is available as an option.
(Art.No. 728151)
The function must then be activated in the
Settings/ External thermostat menu.
The display "External contact" shows whether the external thermostat is
switched ON or OFF.
The stove starts / stops after a slight delay.
The external thermostat must be connected to the slots "I03" & "GND"
(direct current series) on the control unit.
It applies the temperature control after being activated in the menu item "External thermostat".
CAUTION: To activate the external thermostat, the stove must be started once manually after the thermostat
has been installed.