Function- Fill Level Indicator; Function- Timers, Setting Heating Times - Austroflamm Ruby Manuel D'instructions

Masquer les pouces Voir aussi pour Ruby:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

english
6

Function- Fill level indicator

The fill level indicator informs you of the fill level of your pellet hopper. If
the fill level falls below a certain value, a warning is shown on the dis-
play. The fill level indicator must be updated manually each time the pel-
let hopper is filled.
Care should be taken to prevent the hopper from becoming completely
empty, otherwise the fire will go out unintentionally and you the screw
conveyor will have to be filled manually before the next pellet start.
The fill level indicator is calculated according to the size of the pellet
hopper of your stove and the corresponding operating time. To ensure
the stove functions correctly, always fill the tank to the top, while setting
the indicator to "FULL" at the same time.
Press the fill level icon in the room temperature indicator to set the dis-
play to "FULL".
This function can be deactivated in the setting "Menu item: Fuel".

Function- Timers, setting heating times

activate heating times
back
By pressing the "TIMERS" button in the menu list, the "Heating
times" menu can be accessed.
Activate the heating times by pressing "ON" at the top right of the
display.
A maximum of three heating times per day can be saved.
A total of six different heating times can be saved.
Set a new heating time
Edit heating time

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

BenPercyPolly2.0Polly light

Table des Matières