Facom 711 Notice D'instructions page 18

Measuring continuity and resistance
Place the switch on the Ohmmeter function
Press the Ω Ω Ω Ω Ω / •
resistance measurement and vice versa.
The range is selected automatically: read off the measured value.
It is possible to use the additional function keys MIN/MAX,
RANGE,
When carrying out an audible continuity test in the 400 Ω Ω Ω Ω Ω range,
a continuous beep is given out for a resistance R ≤ 40 Ω Ω Ω Ω Ω .
Ω Ω Ω Ω Ω / • 400 Ω Ω Ω Ω Ω 4 k Ω Ω Ω Ω Ω
Digital 0.1 Ω Ω Ω Ω Ω 1 Ω Ω Ω Ω Ω
resolution
Bar graph 10 Ω Ω Ω Ω Ω
resolution
Accuracy ±1.5 %
Open circuit
voltage
Protection
18
to switch from audible continuity test to
and HOLD
(refer to «Additional function keys», page 15)
Unit ranges when measuring resistance
100 Ω Ω Ω Ω Ω 1 k Ω Ω Ω Ω Ω
±1.5 % of Reading ±3 points
± 8 pt
500 V rms and 750 V peak
Ω Ω Ω Ω Ω / •
40 k Ω Ω Ω Ω Ω 400 k Ω Ω Ω Ω Ω 4 M Ω Ω Ω Ω Ω 40 M Ω Ω Ω Ω Ω
10 Ω Ω Ω Ω Ω 100 Ω Ω Ω Ω Ω 1 k Ω Ω Ω Ω Ω
10 k Ω Ω Ω Ω Ω 100 k Ω Ω Ω Ω Ω 1 M Ω Ω Ω Ω Ω
≤ 0.5 V
.
10 k Ω Ω Ω Ω Ω
± 3 %
± 5 pt