Facom 711 Notice D'instructions page 17

Measuring DC and AC voltages
Place the switch on the voltmeter
V elec for measuring voltages with lower impedance.
Place the probe tips in parallel on the circuit to be tested.
The tester is automatically in the
Press the /~
...
The range is selected automatically : read off the measured value.
It is possible to use the additional function keys (MIN/MAX,
RANGE,
AC voltmeter
DC voltmeter
Digital resolution
Bar graph resolution 10 mV 100 mV 1 V
Impedance V
Impedance V elec
AC accuracy
DC accuracy
Acceptable overload
key to select the AC or DC mode
and HOLD)
(refer to «Additional function keys», page 15).
Automatic or manual ranges
~
400 mV 4 V
...
0.1mV 1 mV
~
...
V function for high impedance or on
~ mode (AC) .
40 V
10 mV 100 mV 1 V
10 M Ω Ω Ω Ω Ω
270 k Ω Ω Ω Ω Ω
± 1.5% reading ± 1 point
± 1% reading
600 V rms and 900 V peak
400 V 600 V
10 V 100 V
± 1 point
17