Removal Of The Cabinet - Scotsman SCE275 Mode D'emploi

9. Inform the user of the location and telephone number
of the local service company. Also inform the user of the
required maintenance of the machine.
Notes on Operation
1. The unit will shut off when ice has filled up the bin
and collected on the ice deflector.
2. If the ice machine has just shut off with the bin full of
ice and ice is immediately removed, the machine will
delay its restart for 4 minutes.

Removal of the Cabinet

One of the most useful features of this ice machine is the
ability to remove the cabinet from the ice machine
without removing the ice machine from its installed
position.
To remove the cabinet base the hood must be removed
first.
1. Remove 5 screws and the three grills at the front of
When the machine fills up to its shut off point, ice will
be on the cube deflector.
the base.
2. Push and hold the Off button the AutoIQ Controller
until the machine has switched OFF. Be certain the ice
machine has been switched off.
3. Open the bin door and unscrew the knobs at the left
and right inside of the ice storage bin. Unscrew the
knobs all the way out.
4. Pull the hood and door assembly straight out until it
can be lifted up.
5. In the area behind the grills (removed in step 1) are
two knobs similar to those removed in step 3. Unscrew
and remove the two knobs.
6. Locate the bin drain. Loosen the hose clamp holding
the drain tube to its fitting and pull the drain tube off of
the fitting.
7. Lift up the front of the base and rotate the base up and
off of the ice machine.
7