Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Runtime
When fully charged, the average effective usage times are
between 21 minutes with 5Ah DCB205 battery pack.
It may take several chargings before these times can
be achieved.
OPERATION (FIG. A)
WARNING: To Reduce The Risk Of Electric Shock –
Use indoors only.
WARNING: To reduce the risk of serious personal
injury, turn unit OFF before making any
adjustments or removing/installing attachments
or accessories. An accidental start‑up can
cause injury.
WARNING: Projectile/Respiratory Hazard: Never use
the vac without its filter.
Installing and Removing the Battery Pack
(Fig. H)
WARNING: Ensure the tool/appliance is in the off
position before inserting the battery pack.
nOTE: For best results, make sure your battery pack is
fully charged.
To install the battery pack
battery pack with the rails inside the tool's handle and slide it
into the handle until the battery pack is firmly seated in the
tool and ensure that it does not disengage.
To remove the battery pack from the tool, press the release
button
and firmly pull the battery pack out of the tool
6
handle. Insert it into the charger as described in the charger
section of this manual.
Flexible hose: Flexible for reaching
more hidden‑away areas that the
straight extension can't reach.
Crevice nozzle: Gets in narrow
spaces around the house, jobsite,
and vehicles.
Round brush: Knocks dust and
debris out of tiny places so the
vacuum can pick it up.
gulper with removable brush:
Cleans a wider area and helps
dislodge dust and debris on larger
items around the work area.
Floor nozzle: Pair with the
extension to get dirt and debris
from the floor.
3
into the tool handle, align the
MAINTENANCE
WARNING: To reduce the risk of serious personal
injury, turn unit off and remove the battery pack
before making any adjustments or removing/
installing attachments or accessories. An
accidental start‑up can cause injury.
Your power tool has been designed to operate over a long
period of time with a minimum of maintenance. Continuous
satisfactory operation depends upon proper tool care and
regular cleaning.
Storing the Dust Extractor
WARNING:
a ) Empty the dust collection box before storing the
dust extractor.
b ) Always store your dust extractor with the
batteries removed.
c ) Store the tool and batteries in a place that is as cool
and dry as possible.
d ) Store the tool and batteries in a place that cannot be
accessed by children or unauthorised persons.
e ) Check the tool and batteries for damage after long
periods of storage.
f ) Refer to the Battery Packs, Transportation section of this
manual for further information.
Cleaning
WARNING: Blow dirt and dust out of all air vents with
clean, dry air at least once a week. To minimize the risk
of eye injury, always wear ANSI Z87.1 approved eye
protection when performing this procedure.
WARNING: Never use solvents or other harsh
chemicals for cleaning the non‑metallic parts of the
tool. These chemicals may weaken the plastic materials
used in these parts. Use a cloth dampened only with
water and mild soap. Never let any liquid get inside the
tool; never immerse any part of the tool into a liquid.
Cleaning/Emptying the Dust Bowl and
Filter (Fig. D, E, J, K)
WARNING: Projectile/Respiratory Hazard: Never use
the vac without its filter.
WARNING:
•
Do not wash the inside of the filter.
•
Let the filter dry thoroughly if the inside becomes wet.
•
Do not use a brush to clean the filter.
•
Never use compressed air or a brush to clean filters,
otherwise damage to the filter membrane will occur
which will allow dust to pass through the filter.
nOTE: The filter is reusable, do not confuse it with a
disposable dust bag, and do not throw it away when the
product is emptied. We recommend that you replace the
filter every 6–9 months depending on frequency of use.
Removing Filter
1. Place the vacuum over a trash bin and remove the
dust bowl
2
from the main housing by pressing the
English
9
Publicité
Table des Matières
