Publicité
Les langues disponibles
Les langues disponibles
OBJ_DOKU-0000003193-001.fm Page 15 Friday, June 7, 2013 11:05 AM
Adjusting the cutter-blade clearance
(BLS1.6E, BLS2.5E, BLS3.5, BLS4.2)
(figure 10).
Loosen the screw.
Adjust the desired clearance between cutter
blades with the set screw.
Retighten the screw.
BLS1.6E
Material thickness
Cutter-blade clearance
0.3 mm– 0.6 mm
0.1 mm
0.8 mm– 1.2 mm
0.2 mm
1.3 mm– 1.6 mm
0.3 mm
BLS2.5E, BLS3.5, BLS4.2
Max. work-piece thick-
ness for steel with up to
2
400 N/mm
Min. inside curve radius 0.2 mm
Max. work-piece thick-
ness for steel with up to
2
800 N/mm
Cutter-blade clear-
ance
0.1 mm– 0.2 mm
> 0.2 mm
Fig.10
Screw
1.
3.
Cutter blade
5.
4.
7.
en
15
Set screw
2.
6.
8.
Publicité
