Fein BLS1.6E Mode D'emploi page 14

OBJ_BUCH-0000000109-001.book Page 13 Friday, June 7, 2013 10:26 AM
en
13
Switching on and off (BLS3.5/BLS4.2)
Fig.6
(figure 6).
Switching on:
Push the switch toward the front (I).
Switching off:
Press the switch downward ().
The self-start prevention lock prevents the
power tool from automatically restarting
again, even after a brief interruption of the
power supply, e. g., from a pulled mains plug.
Switch the power tool off and then on again.
On/off switch
Setting the stroke rate (BLS1.6E,
Fig.7
Stroke rate preselection
BLS2.5E, BSS1.6E, BSS1.6CE, BSS2.0E)
(figure 7).
Set the required stroke rate according to the
material being worked.
The stroke rate can be preset in 6 steps with
the control knob for continuously variable
stroke adjustment.
Level 6: Steel and aluminum.
6
Level 1 – 6: Plastic.
5
4
1–5
3
2
1