Fein BLS1.6E Mode D'emploi page 12

OBJ_BUCH-0000000109-001.book Page 11 Friday, June 7, 2013 10:26 AM
Assembly instructions.
Before mounting or replacing cutting tool or accessories, pull the power plug.
WARNING
This preventive safety measure rules out the danger of injuries through acci-
dental starting of the power tool.
Mounting the auxiliary handle
(BLS3.5/BLS4.2) (figure 4).
Depending on the working manner, screw
the auxiliary handle right or left on the power
tool.
Fig.4
1.
en
11
2.
Auxiliary handle