Important; General Characteristics - Astralpool LUMIPLUS PAR56 1.11 Manuel D'installation Et D'entretien

ENGLISH
IMPORTANT: The instruction manual you are holding includes essential information on the safety measures to be
implemented for installation and start-up. Therefore, the installer as well as the user must read the instructions before
beginning installation and start-up.
Keep this manual for future reference.
To achieve optimum performance of the LumiPlus PAR56, follow the instructions provided below:
1. VERIFY THE CONTENTS OF THE PACKING:
The following accessories are included inside the box:
• Unit projector
• Installation and maintenance manual
• Manual for electrical connection
LumiPlus PAR56 1.11
Fixation
Light
RGB
STD
Monocolor
RGB-DMX
RGB
Global
Monocolor
RGB-DMX
This projector is supplied without a niche, which must be chosen according to the type of pool:

2. GENERAL CHARACTERISTICS:

This projector has been designed to be used totally submerged in water. It is a Class III electric apparatus with very low
safety voltage (12V AC or 24V DC).
The projector compiles with IPX8 degree of protection (resistance to penetration of dust, solid bodies and humidity) at a
nominal immersion depth of 2 m.
This projector compiles with international safety standards for lights, especially the EN 60598-2-18 standard. LIGHTS
PART 2: SPECIFIC REQUIREMENTS SECTION 18 LIGHTS FOR SWIMMING POOLS AND SIMILAR APPLICATIONS.
The manufacturer is not responsible in any circumstances for assembly, installation or start-up of any electric components
which have been inserted or handled at locations other than its own premises.
3. INSTALLATION:
• The projector must only work submerged and fixed to the vertical walls of the swimming pool. Never turning the projector
on if it is not submerged in water. In the LumiPlus 2.0 models it is essential that the direction of the lamp is adequate,
situating "TOP" on the top part of the projector.
• To correctly light a swimming pool we recommend you:
Install a lamp in the range LumiPlus 1.11 every 20 m² of water surface.
Install a lamp in the range LumiPlus 2.0 every 25 m² of water surface.
Note: Recommendation valid for light coloured pools. In darker coloured pools or stainless steel pools we recommend
oversizing the proportion of projectors per m².
• In order to prevent glare, the projector s should be installed so that they face away from the residence or usual view of
the swimming pool.
MODELS AVAILABLE ACCORDING TO CHARACTERISTICS
Faceplate
Faceplate ABS
Stainless Steel
56003
66122 56004
66123
52600
52599
67518*
67517*
56005 56006
53838
53839
67519*
53842
Prefabricated swimming pool
Concrete pool
With injerts
00349
• Bag with 2 connection screws
• Guarantee booklet
• Power supply
Fixation
STD
Monocolor
RGB-DMX
-
-
Global
Monocolor
-
RGB-DMX
Without injerts
00364 28887
2
LumiPlus PAR56 2.0
Light Faceplate ABS
45619
RGB
45621
67520*
45640
53841
RGB
53840
67522*
53843
* Power supply included with lightbulb
Panelled pool
With injerts Without injerts
23671 23670
Faceplate
Stainless Steel
45620
45622
67521*
45641
-
-
-