Mounting - Chore-Time W400B1-CT Manuel D'utilisation

CEILING MOUNTING
The Direct Drive Belt Winch is designed to be
mounted to a concealed or web truss structure in
livestock buildings. The roof truss structure must be
engineered to ensure mounting of the winch and the
relevant applied loads will be adequately supported.
Refer to page 5 for mounting bolt hole spacing and
size for fabrication of a suitable mounting structure.
Refer below for mounting examples.
CONCEALED TRUSS MOUNT
WEB TRUSS MOUNT

Mounting

plate
MOUNTING
Ensure the belt wraps on to the
drum on the side closest to the
structural member as shown.
Mounting
plate
An electrician must disconnect electric
power to the winch and control before
removing or opening covers.
Truss braces
7
Truss braces