Mounting - Chore-Time 56928 Manuel D'utilisation

VERTICAL MOUNTING
The Direct Drive Cable Winch is designed to be mounted to a
concealed or web truss structure in livestock buildings. The roof
truss structure must be engineered to ensure mounting of the
winch and the relevant applied loads will be adequately
supported. Refer to page 5 for mounting bolt hole spacing and
size for fabrication of a suitable mounting structure. Refer below
for mounting examples.
CONCEALED TRUSS MOUNT
Mounting plate
(not supplied)
WEB TRUSS MOUNT
Mounting plate
(not supplied)

MOUNTING

Truss braces
Truss braces
7
An electrician must disconnect electric
power to the winch and control before
removing or opening covers.
Ensure the winch
is mounted so
that the cable
passes through
the web truss
openings during
travel