Mounting - Chore-Time 56929 Manuel D'utilisation

VERTICAL MOUNTING
The Direct Drive Belt Winch is designed to be mounted to a
concealed or web truss structure in livestock buildings. The roof
truss structure must be engineered to ensure mounting of the
winch and the relevant applied loads will be adequately
supported. Refer to page 5 for mounting bolt hole spacing and
size for fabrication of a suitable mounting structure. Refer below
for mounting examples.
CONCEALED TRUSS MOUNT

Mounting

plate
WEB TRUSS MOUNT
MOUNTING
Truss braces
Mounting
plate
Truss braces
7
An electrician must disconnect electric
power to the winch and control before
removing or opening covers.
Ensure the winch is
mounted so that the belt
passes through the web
truss openings during
travel