Maintenance - Chore-Time W400B1-CT Manuel D'utilisation

WINCH MODEL
DANGER!
Power MUST be turned off before servicing or adjusting the winch. Isolate the supply when cleaning!
Any works requiring access to electrical connections or junction boxes must be carried out by
a qualified electrician!
The Direct Drive Belt Winch is built for extreme service life and does not need
any internal maintenance. Only trained and competent persons should carry
out maintenance.
Certain mechanical aspects of the installation should be routinely checked
and rectified by a qualified fitter or electrician.
Any works requiring access to electrical connections or junction boxes must
be carried out by a qualified electrician.
If the winch has exceeded the stated working life, replacement is
recommended. All inspections must be monthly beyond the working life.
DISPOSAL
If disposal is required, it should be done using the most up-to-date recycling
technology according to local regulations and laws. Drain oil via the plug
provided on the gearbox, and contain it for safe disposal at a suitable
recycling yard.
It is recommended that the winch be taken to a scrap metal recycling yard.
MAINTENANCE LOG
MONTHLY
Inspect for signs of wear or damage to lifting belt
Check proper operation of the winch (lift/lower)
MONTHLY
Inspect for signs of wear or damage to lifting belt
Check proper operation of the winch (lift/lower)
MONTHLY
Inspect for signs of wear or damage to lifting belt
Check proper operation of the winch (lift/lower)
QUARTERLY
Check tightness of fixing bolts and tighten if needed (ref pg 7)
Check mounting structure, including welds / fasteners etc
Check for any abnormal noises
Brush down and wipe over the winch with a damp cloth
MONTHLY
Inspect for signs of wear or damage to lifting belt
Check proper operation of the winch (lift/lower)
MONTHLY
Inspect for signs of wear or damage to lifting belt
Check proper operation of the winch (lift/lower)
MONTHLY
Inspect for signs of wear or damage to lifting belt
Check proper operation of the winch (lift/lower)
QUARTERLY
Check tightness of fixing bolts and tighten if needed (ref pg 7)
Check mounting structure, including welds / fasteners etc
Check for any abnormal noises
Brush down and wipe over the winch with a damp cloth

MAINTENANCE

DATE
DATE
DATE
DATE
DATE
DATE
DATE
DATE
13
(Copy multiples of this blank
form for future record keeping)
MONTHLY
Inspect for signs of wear or damage to
lifting equipment
Check proper operation of the winch (lift/
lower)
QUARTERLY
Check tightness of fixing bolts and
tighten if needed (ref page 7)
Check mounting structure, including
welds / fasteners etc
Check for any abnormal noises
Brush down and wipe over the winch
with a damp cloth
CHECKED / COMPLETE (SIGN)
CHECKED / COMPLETE (SIGN)
CHECKED / COMPLETE (SIGN)
CHECKED / COMPLETE (SIGN)
CHECKED / COMPLETE (SIGN)
CHECKED / COMPLETE (SIGN)
CHECKED / COMPLETE (SIGN)
CHECKED / COMPLETE (SIGN)