Date And Time" ("Set Date And Time"); Unit Configuration" ("Units"); Buttons On Product" ("Enable/Disable Settings"); Delete History - Grundfos CRE Notice D'installation Et De Fonctionnement

7.27 "Date and time" ("Set date and time")

Pump variant
CME
CRE, CRIE, CRNE, CRKE,
SPKE, MTRE
The availability of this menu depends on the functional module
fitted in the pump:
Function (terminal)
"Date and time"
* See section 5.2.1 Identification of functional
You can set date and time as well as how you want them to be
viewed in the display:
• "Select date format":
"YYYY-MM-DD"
"DD-MM-YYYY"
"MM-DD-YYYY".
• "Select time format":
"HH:MM 24-hour clock"
"HH:MM am/pm 12-hour clock".
"Set date"
•
"Set time".
•
Factory setting
See section 10. Technical data.

7.28 "Unit configuration" ("Units")

Pump variant
CME
CRE, CRIE, CRNE, CRKE, SPKE,
MTRE
In this menu, you can select between SI and US units. The setting
can made generally for all parameters or you can customize for
each parameter.
Factory setting
See section 10. Technical data.
54
"Date and time"
("Set date and time")
●
●
FM 200* FM 300*
(standard) (advanced)
- ●
module.
"Unit configuration"
("Units")
●
●

7.29 "Buttons on product" ("Enable/disable settings")

Pump variant
CME
CRE, CRIE, CRNE, CRKE,
SPKE, MTRE
In this display, you can disable the possibility of making settings
for protective reasons.
Grundfos GO
If you set the buttons to "Not active" the buttons on the standard
control panel are disabled. If you set the buttons to "Not active"
on pumps fitted with an advanced control panel, see below.
Advanced control panel
If you have disabled the settings, you can still use the buttons to
navigate through the menus, but you cannot make changes in the
"Settings" menu.
When you have disabled the possibility to make settings, the
symbol appears in the display.
Advanced control panel:
To unlock the motor and allow settings, press
simultaneously for at least 5 seconds.
Standard control panel:
The button always remains active but you can
only unlock all other buttons on the motor with
Grundfos GO.
Factory setting
See section 10. Technical data.

7.30 "Delete history"

Pump variant
CME
CRE, CRIE, CRNE, CRKE, SPKE,
MTRE
This menu is only available in the advanced control panel.
In this menu, you can delete the following historic data:
• "Delete operating log".
• "Delete energy consumption".
"Buttons on product"
("Enable/disable settings")
●
●
and

"Delete history"

●
●