Dmx Channels - IMG STAGELINE SCAN-20LED Mode D'emploi

9 Cleaning of the Unit
GB
The mirror, the lenses and the colour wheel should be
cleaned at regular intervals, depending on impurities
caused by dirt, smoke or other particles. Only this will
ensure that the light is radiated at maximum bright-
ness. Prior to opening the unit, disconnect the
mains plug from the socket. Only use a soft, clean
cloth and a glass cleaner. Then carefully wipe the parts
dry.
For cleaning the other parts of the housing, only use
a soft, clean cloth. Never use any fluid; it may leak into
the unit and cause damage.
10 Specifications
Power supply: . . . . . . . . 230 V~ / 50 Hz
Power consumption: . . . 80 VA
Light source: . . . . . . . . . 1 super bright white LED,
Ambient temperature: . . 0 – 40 °C
Dimensions. . . . . . . . . . 195 × 180 × 400 mm
Weight: . . . . . . . . . . . . . 4 kg
Subject to technical modification.
All rights reserved by MONACOR
be reproduced in any form or by any means for any commercial use.
14
10 W
® INTERNATIONAL GmbH & Co. KG. No part of this instruction manual may

10.1 DMX channels

DMX value Function
Channel 1: pan of mirror
0 – 255 approx. -90° to +90°
Channel 2: tilt of mirror
0 – 255 approx. 10° to 85°
Channel 3: stroboscope
0 – 7 light beam deactivated
8 – 15 light beam constantly activated
stroboscope: slow → fast
16 – 131
132 – 139 light beam constantly activated
The light beam will gradually become
brighter and will be deactivated after
reaching its maximum brightness*.
execution speed: slow → fast
140 – 181
182 – 189 light beam constantly activated
The light beam will gradually become
darker and will then switch back to
bright*.
execution speed: slow → fast
190 – 231
232 – 239 light beam constantly activated
stroboscope with random flash
240 – 247
sequence
248 – 255 light beam constantly activated
*depending on the adjustment of channel 6 (dimmer)