Clock And Timer; Clock Setting; Timer Functions - Philips FW-R33 Mode D'emploi

Clock and timer

CD CHANG E
STAN DBY• ON
ECO POW ER
DIS PLA Y

Clock setting

Manual clock setting
1
Press 2 STANDBY·ON as often as necessary on the unit
to switch the unit to standby.
2
Press CLOCK·TIMER on the unit.
3 Rotate í JOG CONTROL ë to select the clock.
CLOCK is displayed and X starts blinking.
4
Press YES to confirm the selection.
The digit for the day of the week blinks.
5 Rotate í JOG CONTROL ë to set the day.
6
Use à SEARCH or á SEARCH on the unit to move
from day of the week to hour.
7
Rotate í JOG CONTROL ë to set the hour.
8
Repeat steps 6 and 7 to set the minutes.
9
Press YES to confirm the settings.
26

Timer functions

OPEN•CLOSE
You can select 2 timer functions which will be activated at a
chosen time: alarm timer and sleep timer. Make sure the
clock is set before using one of these features.
Alarm timer setting
The unit can be used as an alarm clock, whereby the tuner,
CD changer or CD recorder starts playback automatically
at a preset time.
1
Follow steps 1 and 2 of "Manual clock setting".
2 Rotate í JOG CONTROL ë to select the alarm timer.
AUX
3
Press YES to confirm the selection.
4 Rotate í JOG CONTROL ë to set the hour.
5 Use à SEARCH or á SEARCH on the unit to move
from hour to minutes.
6 Rotate í JOG CONTROL ë to set the minutes.
7
Press YES to confirm the time settings.
8 Rotate í JOG CONTROL ë to select the source you
want to be woken up with.
9
Press YES on the unit to confirm the source selection.
Switching the alarm timer on/off
Press TIMER ON/OFF on the remote control repeatedly to
switch the alarm timer on or off:
To stop the alarm press 2 STANDBY·ON on the unit.
0 0
Sleep timer
You can set a certain period of time before the unit
switches off.
1
Press SLEEP repeatedly on the remote control until the
desired sleeper time is displayed.
2
As soon as the desired time is displayed, do not press
SLEEP again.
To deactivate the sleep timer, press SLEEP on the remote
control until SLEEP OFF is displayed.
ALARM is displayed and
ALARM
The hour digit will blink.
is shown and ALARM ON is displayed: the alarm
ALARM
timer is switched on.
goes off and ALARM OFF is displayed: the alarm
ALARM
timer is switched off.
is shown and SLEEP 15 MIN, 30 MIN,
SLEEP
45 MIN, 60 MIN or SLEEP OFF is displayed.
After the chosen time has elapsed, the unit switches to
standby.
is blinking.