Features; Cd Text Editing (On Cd Recorder Only) - Philips FW-R33 Mode D'emploi

Features

DISP LAY
CD text editing (on CD recorder
only)
Storing text during stop mode
After you have recorded your CDR(W) you can enter text,
e.g. names to discs and tracks.This text will be displayed
during playback on this unit, but also on other sets
equipped with the CD text feature.You can enter up to
60 characters per text field. Only use an unfinalized CDR
or CDRW (finalized CDRW must be unfinalized first).
1 If necessary press Ç to stop playback.
2
Press CDR to select the CD recorder.
3
Press CD TEXT/EDIT to enter the text edit menu.
is blinking. TEXT EDIT is displayed.
CD TEXT EDIT
4
Rotate í JOG CONTROL ë to select either:
ALBUM ARTIST: for editing the CD artist
ALBUM TITLE: for editing the CD title
ARTIST TR 1 (or 2, 3,...): for editing the artist of track
1 (or 2, 3,...)
TITLE TR 1 (or 2, 3,...): for editing the title of track 1
(or 2, 3,...)
5
Press YES to confirm the selection.
6 Rotate í JOG CONTROL ë to select a character.
After selecting a character, the cursor moves
automatically to the next character space.
7
Repeat step 6 for adding further characters.
8
Press YES to save the characters that have been selected
and to exit to the last position in the text editing menu.
UPDATE is displayed.
Storing text during recording
You can store and edit text even while recording. Editing
text during finalizing is not possible.When using high speed
recording and automatic finalizing, make sure to enter the
text before finalizing starts, otherwise, automatic finalizing
will be cancelled.
Follow steps 3–8 of "Storing text during stop mode".
24
Auto copied text
When an artist's name has been stored for a track, it will be
copied automatically into the next track.
AUX
Press either:
YES to confirm the copied text,
or
NO to delete the copied text and to enter a new one.
Inserting a space
1
Press à SEARCH or á SEARCH to move to the
position where the space is to be inserted.
2
Press YES to confirm the position of the insert character.
Deleting and substituting a character
1
Press à SEARCH or á SEARCH to move to the
character's position to be deleted or substituted.
2
If you want to delete the character:
Press NO.
If you want to substitute the character:
Rotate í JOG CONTROL ë to select a new character.
Press YES to confirm the selection.
To change another character press à SEARCH or
0 0
á SEARCH.
Erasing text
1
Press CD TEXT/EDIT to enter the text edit menu.
2
Rotate í JOG CONTROL ë to select the text erase menu:
3
Press YES to confirm.
4 Rotate í JOG CONTROL ë to select one of the following:
5
Press YES to start erasing.
Erasing from the memory
When the text memory of your CD recorder is almost full,
the messages MEMORY FULL and FINALIZE DISC will
be displayed. If you still want to add a new disc to the text
memory, you have to finalize another disc.
The position starts blinking.
A space will be inserted after the cursor.
The character starts blinking.
The character is deleted and the text is shifted one
position to the left.
is blinking. TEXT EDIT is displayed.
CD TEXT EDIT
ERASE TEXT is displayed.
ALL TEXT CD: All text of the selected disc is chosen to
be erased in one step.
ALL TEXT TR1 (or 2, 3,...): All text of track 1 (or 2, 3,...)
is chosen to be erased.
CD TITLE: CD artist's name and CD title are chosen to
be erased.
The chosen text will be erased.