Faults; Overview - BADU JET Vogue Instructions D'utilisation

7

Faults

NOTICE
It is normal for a few drops of water to escape from the
mechanical seal from time to time. This is especially true during
the break-in period.
Depending on the water quality and number of operating hours,
the mechanical seal can begin to leak.
 If water leaks constantly, have the mechanical seal replaced
by a qualified technician.
NOTICE
We recommend first informing the swimming pool contractor if
there are irregularities.
7.1

Overview

Problem: Pump is switched off by the built-in or external overload
switch.
Possible cause
Overload.
Media temperature too high.
Problem: Pump seizes.
Possible cause
Mechanical seal is stuck.
08|2018
Solution
 Check pump. See point
7.1.1 on page 49.
 Wait for the motor winding
to cool down and the
motor protection to turn
back on.
Reduce the media

temperature.
Solution
 Turn the motor shaft. See
point 6.1.1 on page 43.
 Clean pump and pump
parts.
Faults
EN 47