Cleaning And Maintenance; Disposal - Beurer IH25 Mode D'emploi

9

Cleaning and maintenance

Inhaler
Clean the unit occasionally.
Important
Before you clean the unit, always switch
it off, unplug it and let it cool off.
Clean using a damp cloth, to which you
can apply a little detergent if necessary.
Do not use abrasive detergents and ne-
ver immerse the unit in water.
Important
• Ensure that no water penetrates in-
side the unit!
• Do not put the device or accessories in
a dishwasher.
• Do not touch the unit with wet hands
while it is plugged in; do not allow any
water to be sprayed onto the unit. The
unit must be operated only when it is
completely dry.
10

Disposal

In the interest of environmental protection,
do not dispose of the device in household
waste.
• Do not spray any liquids into the ven-
tilation slots. Any liquid that pene-
trates into the unit can damage the
electrical parts or other components
of the inhaler and impair the function
of the device.
Condensation, care of the hose
Depending on the environmental condi-
tions, condensation may collect in the
hose. To prevent against bacterial
growth and to ensure effective therapeu-
tic use, this moisture must always be
removed. To remove moisture from the
hose, proceed as follows:
• Remove the hose [15] from the nebu-
liser [11].
• Leave the hose plugged into the in-
haler [6].
• Run the inhaler until all the moisture
has been displaced by the flow of air.
• In the event of heavy contamination,
replace the hose.
Please dispose of the device in
accordance with EU directive
2002/96/EC – WEEE (Waste
Electrical and Electronic Equip-
ment).
If you have any questions, please con-
tact the local authorities responsible for
waste disposal.
28