Operation; Wall Mounting - switel DB50 Mode D'emploi

Operation

4 Operation
Storing phone numbers
1. Remove the protective cover (4) completely from the dialler.
2. Slide the M.set/Dial switch (9) to the its M.set" position.
3. Press the SET button (6).
4. Enter the required phone number (max. 16 digits).
5. Press the direct dialling key (1) to which the phone number should be
assigned when saved.
6. Slide the M.set/Dial switch (9) to its Dial" position.
Dialling stored phone numbers
1. Lift the telephone receiver.
2. Press the relevant direct dialling key (1).
Inserting pictures or photos in the direct dialling keys
1. Remove the protective foil carefully using a pointed item.
2. Place the picture or photo, cut to size, in position.
3. Replace the protective foil.

5 Wall mounting

1. Drill two holes, one vertically above the other and 100 mm apart.
2. Insert dowels in the holes.
3. Screw in the screws, leaving approx. 5 mm projecting out of the wall.
4. Position the dialler with its wall installation slots (7) over the screws, insert
them in the slots and slide the dialler approx. 10 mm downwards.
28
Always pay attention that the M.set/Dial switch (9) is set to Dial".
Pay attention that the 4 tongues of the
protective foil are inserted in the not-
ches (10) provided.
Caution: Ensure there are no lines or cables at the positions where the
holes are drilled!
10
10