Installation Of The Outdoor Unit - Tectro TPX 32 Manuel D'utilisation

INSTALLATION OF THE OUTDOOR UNIT

28.3 cm
28.7 cm 1
2
3
C
OPERATION
1
2
3
COOLING
When the unit is in the cooling mode, the following functions apply:
•
•
4
56
Firmly screw the mounting bracket
Connect the safety belts to the outdoor unit and a fixed object inside the
room in order to avoid danger when accidentally dropping the outdoor unit.
Hang the outdoor unit.
IMPORTANT
The condensation water must flow freely. Blockage of the drainage tube
can result in water leakage or improper operation of the unit.
Insert the plug into the wall outlet.
Press the -button to switch on the air conditioner.
With -button you can change the operating mode of the unit.
By pressing the -button the following modes appear:
Cooling, the green light lits.
Dehumidifying, the orange light lits.
Air circulation, the yellow light lits.
The fan speed can be adjusted by pressing the
Maximum setting.
Medium setting.
Lowest setting.
The temperature can be set by pressing the
between 16°C en 32°C. The display will show the set temperature for 15
seconds and the "set temp" will light up. Fifteen seconds after setting the
required temperature, the display will show the room temperature.
It depends on the environment whether the required temperature will
be reached. It is not a malfunction of the air conditioner if the room
temperature remains above the "set temp".
to the wall.
-button
and buttons, anywhere